Tag Archives: insight

General Forex

An Insight In To Forex EA

Forex EA stands for foreign exchange Advisor. Used on the Meta Trader software platform for trading purposes. A foreign Exchange expert advisor automates your entire trading system thus allowing you to make money without much effort. Since 2008, hundreds of this forex EA has flooded the market, however a number of them are just but bogus. This is not to say that there are no good ones, thus one needs to undertake due research before buying a forex EA.

Basically an EA is a set of rules programmed in to the Meta Trader platform for trading. This facilitates execution of the rules on an autopilot without involving the user. Owing the fact that they trade the forex 24/7, they are also known as trading robots. Other than running the EA on home computers, you can also run it on private virtual servers (VPS) alleviating the need to have your computer on throughout.

Forexforeign Expert AdvisorScalping Systems

They are very common. They take small profits ranging from 5-10 pips several times during the day. They are advertised as winning 90 % to 95 % of the time. However, the problem is in the high amount of stop losses to protectyour money. For every 10 pips in profit made, the risk involved is 100 pips. You can win 9 out of ten pips but end up being the overall loser.

Trend Forex EA

This system observes the overall course or trend of the forex markets jumping on to it after it has started. As opposed to the other systems like the Martingale or scalping, trend system does not trade on regular basis. To a large extent this system works a great deal. The problem being markets don’t trend. All they do mostly is that they keep on going back and forth. Meaning you can lose a lot of trades before you start gaining.

Martingale Forex EA Systems

Of all the forex EA, a martingale system is the most common. Based on the martingales system of betting whereby when you place a bet and lose you double the bet until the time when you win on your bet. Winning a bet means recouping on your losses and making profits.

Important Information

Though EA systems have been given a lot of hype marketing, many of them do not end up working at all times. This is because markets do change. One time they might be a boom, and then the next time things might work against you. Keeping in mind that Expert Advisorswork on set of rules and thus they are unable to adjust to the market changes.

Market Analysis

Technology Insight Report: Carbon Nanotubes in Energy Storage Devices

Leave a comment

Carbon Nanotubes with their extraordinary properties in terms of strength, thermal and electrical properties are poised to have a big impact on the future of material sciences, electronics and nanotechnology. Owing to their specialized structures and minute diameter, they can be utilized in the creation of ultra-thin energy storage devices which in today’s world where electronics is getting smaller could redefine the electronics market and replace capacitors and batteries they way we see them now. Research and development around carbon nanotubes is moving ahead yielding new forms, new applications and new material based on this unique structure and we take a look into this breakthrough in science and the innovation that surrounds it as it promises to be a large part or small devices of the future.

Introduction to Carbon Nanotubes

Carbon nanotubes (CNTs; also known as buckytubes) are allotropes of carbon with a cylindrical nano structure. Nanotubes have been constructed with length-to-diameter ratio of up to 132,000,000:1, which is significantly larger than any other material. These cylindrical carbon molecules have novel properties that make them potentially useful in many applications in nanotechnology, electronics, optics and other fields of materials science, as well as potential uses in architectural fields. They exhibit extraordinary strength and unique electrical properties, and are efficient thermal conductors.

Nanotubes are members of the fullerene structural family, which also includes the spherical buckyballs. The ends of a nanotube might be capped with a hemisphere of the buckyball structure. Their name is derived from their size, since the diameter of a nanotube is on the order of a few nanometers (approximately 1/50,000th of the width of a human hair), while they can be up to 18 centimeters in length (as of 2010). Nanotubes are categorized as single-walled nanotubes (SWNTs) and multi-walled nanotubes (MWNTs).

Market Analysis

Visionshopsters Announce New Report “us Hip And Knee Implants: Strategic Market Analysis And Insight To 2015”

Leave a comment

US Hip and Knee Implants: Strategic Market Analysis and Insight to 2015

“US Hip and Knee Implants: Strategic Market Analysis and Insight to 2015” report is an essential source of data and analysis on the US hip and knee implants market with complete coverage by categories. The report provides market landscape, competitive landscape and market trends information on six market categories – primary hip replacement, partial hip replacement, revision hip replacement, primary knee replacement, partial knee replacement and revision knee replacement. The report identifies the key trends shaping and driving the dynamism in the US hip and knee implants market. The report also provides insight on the prevalent competitive landscape and on the emerging players which are expected to bring significant shift in the market standing of the existing leaders. The report also provides valuable insight on the pipeline products within the US hip and knee implants market.

The US Hip and Knee Replacement Market Set To Boom in The Next Seven Years Driven By Aging Population

In 2008, the US hip and knee replacement market was valued at $6.7 billion and is forecast to grow by 11.9% over the next seven years to reach $14.8 billion. The US knee replacement market was valued at $4.1 billion in 2008 and is projected to grow at 12.9% for the next seven years to reach $9.6 billion by 2015.The knee replacement market was the largest segment with 59% contribution to the total joint replacement market, while the hip replacement market contributed 38% in 2008. The market is expected to be driven through 2008–2015 by; increasing incidence of osteoarthritis, aging demographics, trend towards early surgical intervention in younger patients, emergence of new procedures such as joint resurfacing, and greater penetration of existing technologies.

Hip and Knee Replacement, US, Revenue ($m), 2008–2015

Hip and knee joint replacement market to be driven by joint replacements in adults below 65 years

The hip and knee replacement markets are both expected to be primarily driven by the younger 45–65 year demographic going for early joint replacement in the future. Companies are increasingly targeting these individuals through advanced joint implants, new minimal invasive procedures and direct to customer marketing. Improved implant materials and innovative design are increasing the life of the implants, enabling younger patients to undergo treatment without worrying about implant failure later in life. Advancements in procedures have led to the emergence of minimal invasive techniques and partial joint replacements, which enable early recovery and greater range of movement. These incremental technological breakthroughs are enabling younger patients to safely undergo joint replacements. Direct to customer marketing is also helping create a positive perception about the surgery, promoting it as a lifestyle option in which individuals can remain more active into old age.

Incremental technology innovation will drive the market

Product innovations in the fields of implant material and design which improve implant durability is going to drive increased patient volumes, especially among the younger population. Implant materials such as advanced titanium alloys have lead to a resurgence of metal-on-metal implants, while cross-linked polyethylene has enhanced the durability of metal-on-polymer implants. Newer designs which provide more choice of sizes and allow for larger femoral heads have also improved surgery outcomes by providing better stability, reduced chances of dislocation post operation and reduced wear and tear due to better fit. The emergence of custom-fit implants, especially knee implants which are the largest load bearing joints in the body, is also expected to drive the market. Almost all the leading players have customized implants and instrumentation in the market. All these incremental innovations have vastly improved surgery outcomes, and made surgery intervention more appealing to those who earlier waited a few years before undergoing replacement. This expansion of the patient population is expected to drive the market.

Overall, the US hip and knee replacement market is expected to witness robust growth in 2008–2015 as a result of the increased number of younger patients going for surgery, and increased market penetration of existing technologies.

Zimmer, DePuy and Stryker dominate the US hip and knee market

Zimmer Holdings Inc, Stryker Corp. and DePuy Inc., are the leading competitors in the US hip and knee replacement market, together accounting for 70% of market share in 2008. Other significant players are Smith & Nephew and Biomet. Zimmer is the market leader in both hip and knee replacement markets with a 29% and 26% market share respectively. Product differentiation; especially in the knee replacement market, such as gender solutions and a range of high-flex knees; has enabled Zimmer to maintain its dominance. Zimmer recently announced that it will start developing products aimed at meeting the specific needs of obese patients. However, in 2008, it lost some market share in the hip replacement market, due to product recall of Durom Acetabular component following reports of cup loosening and high revision rates.

To know more about this report & to buy a copy please visit :

Contact Us:

Visionshopsters
Ph : 91-22-40583000
Emailid: marketing@visionshopsters.com
Website : www.visionshopsters.com